Homepage | Home | Bookmarke
Member

Jiangsu Keheng Petrochemical & Electrical Machinery Co.,Ltd


Products
  • No Category
Search
 

Friends links
  • No link
You are here: Home » Products » Swivel Angle Industrial Mixer
Swivel Angle Industrial Mixer
Click image to view full size image
Product: Views:308Swivel Angle Industrial Mixer 
Unit price: Negotiable
MOQ:
Quantity:
Delivery date: Since the payment date Days delivery
Valid until: Long-term effective
Last updated: 2019-03-30 23:09
  Inquiry
Details

Introduction of V-Type Side-entry mixer:

Installing a side-entry mixer in the oil tank, is used for mixing oils or other medium and then reach the purpose of harmonization, heat transfer , homogenization and prevention of sediment accumulation. Using this equipment has many advantages, such as small investment, convenient operation, high efficiency, low power consumption, low static electricity generated in medium and guarantee product quality.


V-Type Side-entry mixer can be installed in petroleum tank, lubricating tank, fuel oil drum, paraffin tank and some storage tanks for additive and other medium which need to be stirred.

Swing Angle changes of V-Type Side-entry mixer

The variable insertion Angle agitator is used to prevent the accumulation of sediments, and the change of rotation Angle as follows.


Material


Selection of paddle impeller for mixing equipment

Choosing the shape of the blades of the mixing plant is an important step in the design of the agitator. The following is a brief introduction to the selection of the paddle impeller. I hope everyone likes it:

The paddle impeller is the simplest type of agitator. The slender, continuous plate-like blade is welded, riveted on the hub or clamped on the agitator shaft, so the price is low, about 35% to 40% of the mixing equipment is used. This kind of agitator. Usually, there are 3 blades per impeller. The blades can be mounted vertically on the hub, a so-called flat blade. It can also be mounted on the hub at an angle, that is, a so-called folding paddle.

The flow pattern formed by the paddle impeller is similar to that of a turbine impeller, and there are also differences in runoff and axial flow. However, the main function of the blade is to have a strong circulation function, and it is mostly used for the stirring which requires the blade to discharge (circulate) as a main purpose. In the case of the same discharge, the operation cost and power consumption of the folding paddle are slightly better than that of the flat blade. In actual engineering, a large-diameter low-speed impeller is often used, and although the shearing effect is not large, the circulation in the tank is good. Since a large diameter impeller can be used, it can also be used for agitation with a medium viscosity of 50 Pas. At this time, in order to make the upper and lower layers of the tank easy to exchange, a multi-stage impeller having 3 to 5 stages is often used, or lateral blades are mounted on the blades.


http://www.kehengmixers.com/

Inquiry